- +91 9442461708
- huzefa74@gmail.com
Hydraulic Pipe Clamp
- Home
- Hydraulic Pipe Clamp
Industrial Pipe Support Range
Hydraulic pipe clamp products from IHPC help organise and secure industrial tube and pipe runs. Compare heavy, standard and twin-series options, then confirm pipe diameter, load, mounting and material requirements.
Hydraulic pipe clamp products from IHPC help organise and secure industrial tube and pipe runs. Compare heavy, standard and twin-series options, then confirm pipe diameter, load, mounting and material requirements.
A pipe clamp supports tubing or pipe at planned intervals and helps control movement, vibration and routing. The correct series depends on outside diameter, load, installation spacing, support material and environmental conditions.
The workbook identifies Safelock as a requested brand. The current live catalogue lists IHPC pipe-clamp products, so mention Safelock in the enquiry if that brand is mandatory and the team will confirm availability.
Selection note: A pipe clamp is different from a hydraulic clamping cylinder or swing clamp used for workholding and fixtures.
Representative heavy, standard and twin-series products from the live catalogue are shown below.
Heavy-series pipe support option from the current IHPC catalogue.
Standard-series clamp for general industrial tube and pipe routing.
Twin-series configuration for paired line routing where suitable.
Pipe clamps hold tube or pipe in a controlled position while allowing the system designer to manage spacing, vibration and service access. The clamp body, mounting hardware and rail or plate arrangement must suit the installation.
Final spacing and load decisions should follow the system designer and manufacturer guidance.
Match the exact outside diameter and tolerance.
Choose light, standard or heavy construction as required.
Identify plate, rail, twin or multiple mounting.
Check temperature, corrosion and material compatibility.
Final suitability depends on the complete application and the current manufacturer technical data.
Organised support for hydraulic and lubrication lines.
Pipe routing in dusty, vibration-prone industrial areas.
Tube support on production and test machinery.
Compact routing around pumps, valves and reservoirs.
It supports and organises pipe or tubing within a fluid-power installation.
Start with the pipe outside diameter, then confirm the series, load, material and mounting arrangement.
The term can describe pipe support near cylinders or a separate workholding device. Share a photo or drawing so IHPC can identify the requirement.
Safelock is listed in the approved page plan, while the current website catalogue shows IHPC-branded clamp products. Ask the sales team to confirm present brand availability.
Send your application details to IHPC for product matching, current availability and a quotation.
